The three-tier design of this shoe cabinet can hold up to 9 pairs of shoes and the wall-mountable installation can save more space in your entryway. Hurry up and take it home with you! High-quality Material: The shoe cabinet is made of 0.03inch thick cold rolled steel, which is tough and not easily deformed.
And the inside of the back of the shoe cabinet is welded reinforcement plates to make the shoe cabinet last longer. Great Home Decor: In classic white with a simple design, this shoe storage cabinet provides a sense of modernization, which enriches your entire entryway and gives your house a new look, showing off your lifestyle. Large Capacity: The shoe cabinet has 3 tiers and can store up to 9 pairs of shoes to meet your storage needs. When it is mounted on the wall, the spare bottom floor can also be used to store slippers, etc. Humanized Design: Its surface is smooth without burrs, and it will not scratch the hand. The corners of the frame are designed with rounded corners, so you will not be injured during use. Relieving Your Fatigue: This beautiful shoe cabinet guards the door every day and welcomes you home. It allows you to put away your exhaustion as soon as you get home and start enjoying leisurely home life by taking off your shoes. Organized Lifestyle: This shoe cabinet cleverly integrates shoe storage into life, placing it at the doorway to store your messy shoes, making it pleasing to the eyes as soon as you open the door, bringing you an organized lifestyle.Thoughtful Design: Each layer is equipped with a damping switch and rubber magnetic suction, which not only reduces noise and prevents your hands from being injured when opening and closing, but also enhances the sealing of the shoe cabinet. Tipping Bucket Design: The entire shoe cabinet features a tipping bucket design for easy opening and closing, making it very easy to use.
It also keeps dust out of the shoe cupboard. Space Saving: With a small footprint of 19.884.8inch at the bottom, it can be placed in every corner of the home. By using the doorway space wisely, even a small entryway can be turned into a storage treasure trove. Also, it can be mounted on the wall to save floor space. Easy to Clean: Its smooth surface makes it very easy to clean, all you need to do is wipe it down regularly with a dry cloth or wash away any serious stains.
And the shoe cabinet is held in place with spring pins and is removable for easy cleaning. Avoiding Creases: This large capacity shoe cabinet can accommodate boots and medium boots, allowing them to stand securely or be placed at an angle to avoid wrinkles on the surface.
Reinforced Shoe Hopper: The shoe hopper is reinforced on three sides, making it stable to open and close without wobbling. Top Platform: The top platform is spacious enough to hold keys, photo frames, etc.
Pre-drilled Holes: There are four pre-drilled holes at the back of the shoe cabinet to allow you to fix the cabinet to the wall and prevent it from collapsing. Full Plate Layer: The layer rack is designed with a full plate, which can effectively prevent the ash on the bottom of the shoes from falling onto the shoes on the lower layer. At the same time, the full plate layer shelf places shoes more stably, and even high heels will not fall.
Concealed Handle: The concealed pull handle is semi-circular. The curved shape is not only subtle and beautiful but also makes it easy to open and close the shoe cabinet without hurting your hands. It is suitable to be placed at the door, living room, or bedroom used to place slippers, casual shoes, high heels, boots, leather shoes, and other shoes, as well as some daily necessities such as keys, books, and umbrellas. It can be used as a bookshelf and storage rack. Place the shoe cabinet in the position where it is to be installed. Mark the hole locations with a marker. Punch the holes in the marked positions. Insert the plastic expansion tube into the punched holes. Screw the screws into the plastic expansion tube (halfway in first). Align the shoe cabinet with the screw fixing holes and hang it. Tighten the screws so that the back of the shoe cabinet fits snugly against the wall. Check that the shoe cabinet is not loose. Installation Type: Freestanding, Wall Mounted. Plate Thickness: 0.8mm/0.03inch. Gross Weight: 13.5kg/29.76lbs.Product Size: 50.512.2103.3cm/19.884.840.67inch. Package Size: 1155919cm/45.2823.237.48inch. Please note that this is a slim shoe cabinet that can accommodate shoes up to 4.72inch in height and 12.2inch in length. Feedback is very important to us. It is impossible to address issues if we do not know about them!
Faction is our ultimate goal. We work hard to earn your trust and future business. A If you receive a defective item, you may return it or ask for a discount.Due to time zones, our reply to your questions may not be immediately. If it's non-workdays, please kindly be patient and wait till Monday. Number of Items in Set.